UV-C FAQ’S

UV-C FAQ’S2024-04-15T23:47:37+00:00

UV-C Air Sanitizer®

UV-C FAQ’s

 

What is the range of ambient temperature?2020-10-09T15:54:40+00:00

135 degrees Fahrenheit

Will the UV-C light degrade fiberglass insulation inside the AC duct housing next to the coils?2020-10-09T15:54:40+00:00

Fiberglass insulation holds up quite well to UV-C.  The UV-C will not affect the “glass” component in the insulation, it can affect the binders in the insulation, but overall we tend to not worry about insulation if it is glass based.  Same thing can be said for filters, i.e. synthetic filters will get eaten up by the UV-C, but glass-based filters (e.g. HEPA) hold up to UV-C.

How many hours does the UV-C lamp last?2020-10-09T15:54:39+00:00

Life of UVC lamp is 9000 hours.

What effects will UV-C have on plastics such as coil pans?2020-10-09T15:54:38+00:00

UV-C can cause a breakdown of the material over time, if the plastic is not UV resistant. Lab tests reveal no measurable breakdown of plastic material will occur if you position the bulb 30 inches or more away from plastic surfaces.

What precautions should be taken before opening or servicing the ductwork where a UV-C bulb is in use?2020-10-09T15:54:38+00:00

Prior to any service of the HVAC system or ductwork, the UV-C Air Sanitizer should be unplugged and turned off. Read all warning labels and service procedures located in the installation manual.

How much electricity does the UV-C light use?2020-10-09T15:54:38+00:00

Roughly, the light will use 25 watts of power for one bulb.

Does the UV-C Air Sanitizer produce a fresh-air smell?2020-10-09T15:54:38+00:00

Many smells are not addressed by the UV-C Air Sanitizer, however, some unpleasant smells emanate from the development of microorganisms. the UV-C Air Sanitizer works to reduce mold and other common household germs, which in turn can create a fresher smelling environment.

Does Joneca endorse products that produce ozone in living spaces?2020-10-09T15:54:38+00:00

No! Joneca does not endorse the use of ozone in spaces that are occupied. Ozone has been linked to respiratory problems and is a known carcinogen. Because the UV-C Air Sanitizer does not produce ozone, the unit can remain turned on at all times. This feature allows the UV-C Air Sanitizer to continuously attack the microorganisms in the system.

Should the HVAC appliance fan or blower run continuously?2020-10-09T15:54:38+00:00

No. This is not necessary. During normal operation of the heating or air conditioning, the blower will circulate the air over the UV bulb from 50-75 times a day, which is sufficient. During moderate weather, when neither the A/C or heat is on, it is recommended to open the windows to allow for fresh air infiltration and/or to operate the blower continuously (turn on the fan) to circulate air over the UV light.

Is it affordable?2020-10-09T15:54:38+00:00

Compared to high costs of medical treatment and missed work as a result of poor indoor air quality, the UV-C Air Sanitizer pays for itself quickly. the UV-C Air Sanitizer costs only pennies a day to operate, consuming about the same amount of energy as a 25-watt light bulb.

Is the technology proven?2020-10-09T15:54:38+00:00

Yes! the UV-C Air Sanitizer and other UV products have been installed in all types of buildings including: homes, hospitals, offices, public buildings, food preparation plants, electric utilities companies, and more. Consumers constantly report improvements in air quality and reduced respiratory illnesses.

Why install the UV-C Air Sanitizer above the air conditioning coil?2020-10-09T15:54:38+00:00

Moisture collects on the air conditioning coil, creating a damp surface for growth of mold and microorganisms. With the UV bulb over the A/C coil, the bulb will continuously infuse the coil with its rays, successfully disinfecting the air as well as keeping the coil clean.

What is the meaning of microwatts per centimeter at 1 meter?2020-10-09T15:54:38+00:00

Microwatts per centimeter at 1 meter is an intensity rating: the amount of UV-C energy exposed onto one square centimeter of surface area on a target placed 1 meter from the bulb.

Does the bulb require cleaning?2020-10-09T15:54:38+00:00

Yes. The bulb may need to be cleaned every 3 to 6 months depending on its functioning environment. Dirt and oil on the surface of the bulb reduce output intensity. Upon installation, the bulb should be wiped down with the alcohol swab provided. Simply remove the bulb and clean with alcohol. Avoid touching the bulb with bare hands. The oils in your hands can reduce UV output.

Why use eye protection?2020-10-09T15:54:37+00:00

A quick look from a distance may not be a problem, but looking at a UV-C bulb close up for 5-10 seconds could injure the eyes. UV-C light will injure human tissue following continuous exposure and can severely burn the eyes. Shielding the eyes with plastic protective goggles is highly recommended. UV light cannot be seen. When you look at a UV bulb, you are seeing the visible light, not UV light. There are numerous bands in the UV light spectrum. UV-C is used to control mold and microorganisms.

How long does installation take?2020-10-09T15:54:37+00:00

Installation can take 10 minutes. We suggest allotting 30 minutes to play it safe.

Can the UV-C Air Sanitizer be installed in the return air?2020-10-09T15:54:37+00:00

Yes! The return air plenum is an optional location. We recommend the unit be positioned upstream or before the humidifier. This should prevent the bulb from getting water spots. Water spots will reduce UV output.

What kind of maintenance is required?2020-10-09T15:54:37+00:00

It is suggested to regularly inspect air health’s operation through the view port to make certain the bulb is on. It is also essential to change the UV bulb yearly, as the intensity of the bulb’s output diminishes over time. Studies indicate that after 12 months, ultraviolet output will fall below minimum requirements for protection. Even though a bulb may appear to be operating satisfactorily, output intensity may be significantly reduced. The changing of the UV bulb should be done during yearly furnace or A/C Inspection.

What is UV-C light and how does it kill bacteria?2020-10-09T15:54:37+00:00

UV-C is the invisible, ultraviolet, C-band radiation that makes up part of the sun’s light spectrum. By altering the DNA and RNA and effectively sterilizing the organisms, the UV-C light prevents growth and germination of microorganisms. Once sterilized, they cannot reproduce and with their short life cycles, they are successfully killed.

How does the UV-C Air Sanitizer differ from other UV devices?2020-10-09T15:54:37+00:00

UV energy has been successfully used for many applications including water treatment, hospitals, etc. the UV-C Air Sanitizer was designed specifically for use in HVAC systems. It creates a consistent, high output of UV energy. the UV-C Air Sanitizer’s intensity output maximizes microorganism disinfection and guarantees cleaner indoor air.

How long is the warranty?2020-10-09T15:54:37+00:00

The warranty of the UV-C Air Sanitizer is one year from the date of purchase for the unit and 30 days for the bulb.

Why does the bulb require a yearly replacement?2020-10-09T15:54:37+00:00

After 375 days of operation, 9, 000 hours, the bulb starts to become “solarized”. The UV-C output is condensed to around 80% of its original intensity, which steadily weakens thereafter. The bulb will still be illuminated, producing visible light, however, the UV-C light will diminish reducing effectiveness.

What is the best location for the UV-C Air Sanitizer?2020-10-09T15:54:37+00:00

Install the UV-C Air Sanitizer in either the supply or return plenum of the warm air heating system. With A/C systems, the best location is over the air conditioning coil.

Why does the unit remain on at all times?2020-10-09T15:54:37+00:00

Microorganisms collect in moist, dark places. When the light remains on, the reproduction of these organisms may be reduced. The method also simplifies the installation. Complex wiring into the fan circuit is eliminated. Isolation relays, sail switches, and pressure switches are not required for installation. The unit plugs into a standard 120-VAC outlet. It is also more energy efficient to leave the bulb on constantly. Similar to fluorescent lights, the energy necessary to switch on the UV bulb is high, while functioning energy is low.

Is the product suitable for people with severe allergy or asthma problems?2020-10-09T15:54:37+00:00

Yes. By reducing airborne contamination, air health can offer relief to many allergy and asthma sufferers. The device is not solely for people with respiratory disorders. Your whole household can benefit from breathing “healthified” air.

Why use a UV light product?2020-10-09T15:54:36+00:00

The two primary benefits to using UV light are disinfecting air and preventing growth of mold. The UV light radiates a surface to keep mold from growing in that area and disinfects the air stream as it passes through the HVAC system. In one pass over the UV bulb, a high disinfection rate is not normally accomplished in the air stream. With repeated circulation of air through the system, a major disinfection rate is accomplished, making use of UV light very positive.

What is the importance of UV light products?2020-10-09T15:54:36+00:00

Over 90% of people’s time is spent indoors. Concentrations of microorganisms will increase indoors, with little or no ventilation. With a larger number of death cases being caused by various bacteria, controlling the development and spread of pathogens is of chief concern in indoor environments. According to indoor air quality experts, controlling airborne microorganisms is the next major challenge of the HVAC industry.

 

How long has UV been used in air purification?2020-10-09T15:54:36+00:00

UV has been used to purify air since 1936. It was first used to sanitize air in a surgical operating room. UV has been used in schools to reduce the development of epidemics. Restaurants, veterinary clinics, barber shops, incubation rooms, and hospitals also use ultraviolet light applications.

 

Is the UV-C Air Sanitizer harmful in any way?2020-10-09T15:54:36+00:00

If properly installed inside the duct, air health is a safe and practical product. However, direct exposure to UV light is not recommended, as it may cause damage to skin and eyes. UV light does not pass through solid materials such as plastic, glass or metal ductwork.

Does the UV-C Air Sanitizer kill mold?2020-10-09T15:54:36+00:00

Yes. the UV-C Air Sanitizer uses powerful UV light to help reduce and kill mold, bacteria, viruses, dust-mites and other airborne invaders.

features

 

 

How does the UV-C Air Sanitizer work?2020-10-09T15:54:36+00:00

The UV-C Air Sanitizer installs inside the plenum of a forced air heating or air conditioning system. The powerful UV-C rays reduce airborne contamination, as air passes the bulb.

uvc.display3.UVC.forWeb

 

 

Can UV-C products be used at 50Hz?2020-10-09T15:54:36+00:00

Yes, all of our voltage options can be used at 50Hz.

What are the limits of temperature, humidity and velocity?2020-10-09T15:54:36+00:00

Limit rules of thumb are 32-170° F, 99% RH and 1000 fpm, respectively.

 

Do you clean the coil first?2020-10-09T15:54:36+00:00

No. UV-C will degrade all of the organic material on and within a coil, usually within 30 days or less. Prior cleaning of the coil is not necessary, and may delay the benefits of UV-C.

How do you size it?2020-10-09T15:54:36+00:00

For IAQ, improved heat transfer, reduced maintenance and odor, the rule of thumb calls for about 24″ of UV-C Emitter length for every 4 square feet of coil face area. The factory should always size applications involving infectious disease applications.

Is the UV-C Air Sanitizer hard to install?2020-10-09T15:54:35+00:00

No.

Installation instructions are available. Depending on the fixture size and style, installation time can average about 15-20 minutes per fixture.

BUVAS installs from outside your unit—no need to open equipment to get going, or to change the lamp. Simply apply the installation template and follow its directions.

BUVAS’s lamp and lamp socket are water resistant, shock resistant and built to last. Its low voltage meets all codes. The BUVAS is safe and simple— just right for today’s requirements— and its affordable and easy to install.

The factory must always be involved for infectious disease applications.

Where is it installed?2020-10-09T15:54:35+00:00

Bio-Shield UV-C Air Sanitizer fixtures are designed specifically for installation in HVACR applications. On existing systems, infestations always exist. Therefore, the best results are obtained when the light is located downstream of and facing the coil. In this location the user can expect the highest efficacy in eliminating surface (coil and plenum), drain pan and airborne microbes. On new systems, it can be placed either up or downstream of the coil and aimed at the coil.

Does it replace filters?2020-10-09T15:54:34+00:00

No, a UV-C fixture is an air conditioning component that is used in addition to other system parts. These include the coil, heating core, fan, dampers, humidifiers, filters, etc. All are designed to do some form of work within the air handler or on the air.

The UV-C Air Sanitizer should be used in conjunction with standard and high-end filters. HVAC filters trap airborne particles based on their size, allowing most microorganisms to pass through undeterred. The UV light attacks microorganisms. It is recommended to install the UV-C Air Sanitizer downstream of the air filter.

 

How will I save money with UV-C?2020-10-09T15:54:34+00:00

In commercial, industrial or institutional buildings, a Bio-Shield UV-C installation offers the most rapid payback in the industry. A typical installation can pay for in less than two years and save thousands of dollars thereafter in energy and maintenance costs. This is possible because the devices continually clean coils, drain pans, plenums and ducts, reducing or eliminating costly cleaning programs. HVAC energy costs are lowered by improving heat transfer and increasing net cooling capacity. General IAQ is improved for better productivity and less absenteeism. Product quality, shelf life and yield in processing plants are improved as well.

 

Does it produce ozone?2020-10-09T15:54:34+00:00

No, Bio-Shield UV-C devices do not produce ozone or other secondary contaminants.

Will UV-C kill dust mites?2020-10-09T15:54:34+00:00

No.

Will UV-C kill mold in ducts?2020-10-09T15:54:34+00:00

Yes, applying UV-C at the coil dramatically reduces the overall activity in the rest of the A/C system as well as the space. There is scientific evidence of this by Dr.’s Richard Shaughnessy and Estelle Leviten, Tulsa University. View Scientific Study

Can UV-C save energy?2020-10-09T15:54:34+00:00

Yes. The Bio-Shield UV-C Air Sanitizer degrades organic buildup in coils, keeping coils continuously clean. This lowers HVAC energy costs by improving heat transfer and increasing net cooling capacity.

What is UVV?2020-10-09T15:54:34+00:00

UVV light refers to another wavelength in the ultraviolet spectrum. Some UV-C devices also produce light in this wavelength. The manufacturers of these devices promote UVV as an added tool for IAQ control, saying that UVV attacks microorganisms, chemicals, and odors. While this may be true, it is important to understand that UVV (unlike UV-C) will also “attack” occupants in treated spaces by adversely effecting human lungs!

The reason for this is that the shorter (185 nanometers) wavelength of UVV light actually generates ozone. This occurs because UVV light reacts with oxygen to break it into atomic oxygen, a highly unstable atom that combines with oxygen to form O3 (ozone). The American Lung Association states that “exposure to ozone causes a variety of adverse health effects, even at levels below the current standard.” And the U.S. Food & Drug Administration says: “In order for ozone to be effective as a germicide, it must be present in a concentration far greater than that which can be safely tolerated by man and animals.” The longer (254 nanometers) wavelength of UV-C light, by contrast, provides highly effective air, surface, and water disinfection without producing any harmful ozone.

The materials and methods of UV-C lamp construction determine whether a given UV-C device will produce both UV-C and UVV light or only the safer UV-C wavelength. Bio-Shield UV-C devices do not produce any UVV.

Does UV-C relate to UVGI?2020-10-09T15:54:34+00:00

The two terms are basically synonymous. Ultraviolet Germicidal Irradiation (UVGI) is a term used by Federal Agencies such OSHA, NIOSH and the CDC when referring to UV-C.

Does it work?2020-10-09T15:54:33+00:00

Yes, Bio-Shield UV-C Emitters continuously clean coils, drain pans, plenums and ducts; improves product quality, shelf-life and yield in food processing plants.

UV-C Air Sanitizer

How does it affect HVAC biofilm?2020-10-09T15:54:33+00:00

The “C” wavelength targets the DNA of microorganisms, causing cell death or making replication impossible. The UV-C energy kills or inactivates microbes, eradicating surface biofilm.

How can UV-C Lights help me?2020-10-09T15:54:33+00:00

tudies (Health Magazine) show one out of six people who suffer from allergies do so because of the direct relationship to fungi and bacteria in air duct systems. If you or your family is one of these sufferers, studies show these conditions can be triggered by molds, dust and other indoor contaminants (Institute of Medicine). UV-C Light can alleviate your symptoms by attacking your triggers such as dust mites, molds and bacteria. By reducing the impact of these triggers, UV-C Light can alleviate the following:
Asthma, Allergies, Hay Fever, Fatigue, Insomnia, Dizziness, Depression, Headaches, shortness-of-breath, coughing and wheezing.
Also, when someone in your household catches a virus (cold, flu) the virus will be killed off sooner. Before centralized HVAC existed, ill family members would often get isolated in a dedicated room, so that no one else in the family would get sick. However in modern times, there is no longer a “sick room” because the air in all the rooms is pulled back into the main duct system and re-distributed everywhere in the house. With a Bio-Shield UV-C Air Sanitizer system, you can now create that “sick room” once again. The viruses lurking in that room where a family member is ill will eventually get pulled back into the duct system and be killed by the UV-C light, keeping everyone else in the house at a lower risk of getting sick.

Isn’t my expensive air filter cleaning the air enough?2020-10-09T15:54:33+00:00

UV-C Lights kill viruses and super small bacteria that don’t get trapped by the thickest of furnace/AC filters. Even HEPA filters can’t catch them. Viruses are as small as 0.003 microns and bacteria down to 0.2 microns. HEPA filters, if you’re lucky, claim to catch 0.3 microns, but good luck getting any airflow. Thick filter = minimum air flow, great filtration. Thin filter = maximum air flow, little filtration. Optimum filter (MERV 9-11 rating) = good filtration and good air flow.

 

Why do I need a Bio-Shield UV-C Air Sanitizer?2020-10-09T15:54:33+00:00

Studies have shown that inadequate ventilation in homes causes indoor air to be up to 2-5x more polluted than outdoor air. With up to 65 million North Americans suffering from asthma (8 million children), allergies or other respiratory issues, these conditions can be triggered by molds, dust and other aggregates. (Studies have also shown that one gram of duct dust can contain up to 50, 000 bacteria).

What is UV-C?2020-10-09T15:54:33+00:00

UV-C is a type of ultraviolet (UV-C) energy in the 260-nanometer frequency. The “C” wavelength is the most germicidal in the UV-C spectrum.

Do I need UV-C if I use antimicrobial filters?2020-10-09T15:54:35+00:00

UV-C is not a replacement for filters. UV-C addresses the problem of coil “biofilm” which is usually downstream of the filters. Antimicrobial treated filters rely on direct contact to kill the microbes. As the filter builds a layer of dirt on it, this direct contact is eliminated and the microorganisms will not be affected by the chemical treatment. Therefore, treated filters will not accomplish the task of eliminating the growth on the coil.

 

30 Comments

  1. Florencio Garcia Jr December 31, 2015 at 10:55 PM - Reply

    Will the UV-C light degrade fiberglass insulation inside the AC duct housing next to the coils?

    • joneca January 4, 2016 at 6:30 PM - Reply

      Dear Mr. Garcia,

      Fiberglass insulation holds up quite well to UV-C. The UV-C will not affect the “glass” component in the insulation, it can affect the binders in the insulation, but overall we tend to not worry about insulation if it is glass based. Same think can be said for filters, i.e. synthetic filters will get eaten up by the UV-C, but glass-based filters (e.g. HEPA) hold up to UV-C.

      Thank you for your question. We will add this to our FAQ’s for other consumers.

      Happy New Year!

  2. Eric Battenfield May 6, 2016 at 2:54 AM - Reply

    If it is mounted in the return duct, how far from the filter should it be placed? Do you only need to avoid light from the bulb hitting the filter directly or is it more based on distance? I use a large 6+ month pleated filter.

    • joneca May 9, 2016 at 5:25 PM - Reply

      Dear Eric,

      When installing your UV-Sanitizer we ask that the bulb be placed 20″ away from any filter system. This will assist in preventing direct UV damage to your filter.

      Thank you.

  3. Rich August 8, 2016 at 1:19 AM - Reply

    Where is the best location for the light on an N shaped AC coil?

    • joneca August 8, 2016 at 11:50 PM - Reply

      Dear Rich,

      Assuming this is a vertically arranged system (versus an attic system on it’s side), there will be a “box” where the coil is located. Above that there will typically be a “box” where the lamp can be installed so that once installed, the lamp will be over the coil box. These systems are small enough that one lamp will provide enough UV energy bouncing around so that the fact that this is an “N” coil should not be a problem.

      Please email us at consumerservice@joneca.com if you have any further concerns.

  4. Brandon Tuttle February 12, 2017 at 8:52 PM - Reply

    I recently installed a humidifier above the A coil. If I install the UV light about 6″ above the opening to the humidifier, will the bulb be ok with slight exposure to moisture?

    • joneca February 14, 2017 at 7:27 PM - Reply

      Dear Brandon,

      If you remove the humidifier housing and cover it with aluminum tape it should be fine. UV-C is a very good companion to humidified air as that moisture laden air can feed mold growth, etc.

      If these instructions do not make sense for your humidifier then please call us for help. 888-856-6322

      Thank you.

  5. Wesley B. February 20, 2017 at 4:03 PM - Reply

    If I have a horizontal AC unit/ coil arrangement, should I try to place it between the coil and fan or elsewhere?

    • joneca February 22, 2017 at 6:57 PM - Reply

      Wesley,
      Because each HVAC system varies, it is recommended that you contact us directly via email so we we can exchange photos and other pertinent information. consumerservice@joneca.com
      Here is a general diagram about Horizontal placement.
      Horizontal UV-C Installation
      If you still need assistance please give us a call. We will be happy to help. 1-888-856-6322

      Thank you.

  6. Matt April 12, 2018 at 3:13 PM - Reply

    I am planning to install the UV light on return air. there are air pressure switch and humidifier sensor on the same location on the return air. Will the UV light damage the two automatic switches?

    • joneca April 13, 2018 at 4:53 PM - Reply

      We confirm this would depend on what the switches are made of. If they are plastic, the UV will degrade them over time.

  7. Danny Huynh October 4, 2018 at 1:16 AM - Reply

    Do you have a shorter bulb for the AC UV light? Nowadays, residential HVAC units makes more compact units so the space are tighter.

  8. Pukit October 22, 2018 at 3:18 AM - Reply

    Does uvc light creat ozone?

    • joneca November 9, 2018 at 3:41 PM - Reply

      No. It does not create ozone.

  9. David November 26, 2018 at 1:53 PM - Reply

    I have an Aprilaire 800 steam humidifier on my furnace. Will this unit work fine if it gets located near the steam dispersion tube?

    • joneca November 30, 2018 at 9:09 PM - Reply

      David,

      The steam should not effect the lamp, as long as the lamp is running. If the lamp/fixture is not running, moisture might be able to penetrate the fixture as it takes on the same temperature as the air versus being warmer than the air. In a perfect world, we’d want to avoid moisture on the lamp, so if there are other mounting locations/options, e.g. “prior” to the humidifier (upstream) that would be preferable.

      Thank you.

  10. Scott Baxter April 16, 2020 at 9:11 PM - Reply

    There is a plastic film/cover on the bulb itself. Should this be removed?

    • joneca April 17, 2020 at 8:11 PM - Reply

      No. Do not remove the plastic. It is a film to protect you in case the bulb is accidentally dropped and shattered.

  11. Troy Huffman August 4, 2020 at 2:19 PM - Reply

    What is the wavelength produced by the UV-C bulb?

    • joneca August 4, 2020 at 3:46 PM - Reply

      The UV-C germicidal wavelength is 253.7 nm.

  12. Dale Stuart September 30, 2020 at 9:44 PM - Reply

    If you don’t have 120v available can you wire direct to the internal transformer to get the 24v supply.

    • joneca October 5, 2020 at 4:12 PM - Reply

      Direct wiring this product will void the warranty.

  13. CJ July 2, 2021 at 11:21 PM - Reply

    My understanding is that there is a certain amount of exposure time required to deactivate bacteria with UV-C light. If air is moving bacteria through the plenum at speeds higher than the required time, how does the UV-C lamp work to deactivate virus/bacteria?

    • joneca July 8, 2021 at 3:27 PM - Reply

      Dear CJ,

      UV-C and its ability to inactivate pathogens basically factors in time, intensity and the pathogens susceptibility to UV-C. Every pathogen has a different susceptibility to UV-C. Depending on the pathogen, a certain “dose” (which take into consideration time and intensity) us required to inactivate at a certain percentage, e.g. 60% inactivation rate. If you are looking for a high inactivation rate and the velocity is high, you would need more intensity, i.e. more lamps. In certain systems (e.g. residential systems), the air is recirculated and therefore you could have multiple passes of air past the UV-C lamps, also known as “air changes per hour”, which would assist in decreasing the amount of pathogens in the space over time.

      Thank you.

  14. Tom May 30, 2023 at 8:10 PM - Reply

    I plan to install this light, but Incan not find and details on the length of the power cord.
    Thank you.

    • joneca May 31, 2023 at 10:59 PM - Reply

      The length of the power cord is 8ft.

  15. Peter July 10, 2024 at 6:15 PM - Reply

    I will be installing the UV-C lamp in my home HVAC system.
    How does the installation of this UV-C lamp in the system save on A/C operation costs..?

    • joneca July 16, 2024 at 6:44 PM - Reply

      Peter,

      Thank you for reaching out with your question about UV-C lights and their impact on air conditioning operation costs. Please check out the “Improves A/C Efficiency” section on the page to answer your question. https://www.joneca.com/uv-c-air-sanitizer/

      Also, By integrating an UV-C lamp into your AC system, you can significantly diminish maintenance expenses by eliminating the need for professional ductwork cleaning. This technology effectively prevents the buildup of mold and mildew on coils and within the ductwork, which not only enhances system efficiency but also prolongs its lifespan.

      You may find this 1-year customer review informational. https://www.youtube.com/watch?v=MicL8zNpDFw

Leave A Comment

Go to Top